On TS10 you can send faxes directly to a fax recipient, without physically printing first. The process is:

1. Open Vantage or the document that you need to fax
2. Go to PRINT and choose the printer named 80th Xerox
3. IMPORTANT: go to Properties to tell it where to fax.
   If you skip this step, it WILL print out on the Stamping Xerox printer and WILL NOT send the fax.
   
   
4. Click on the button up top for FAX SETTINGS
5. Click on the green button on the left to add a recipient
   
6. Enter a name and a fax number
   IMPORTANT: always start every fax number with 81.
   Each fax needs the 8 for outside line and the 1 for long distance
7. Press OK then OK then print.
8. To check on the status of your fax, click this link.
   It may be helpful to click that link and then bookmark it in your browser so that you don’t have to find this article every time to check a fax status.